OneGuyFromBarlick

It is a bit tricky. The 3 bits together- Pressure bar, U link and Tube - are called “Medi File Tubes”.

The large special file folder is folded over, then folded again in the middle. Open up.
Line up the pressure bar with the pre-punched holes in the centre of the folder, on the left side, with the hook-bits on the outside.
Feed the end of the tubes , right to left , thru the punched holes top and bottom, so that it looks like a backward C.
Then hook and secure around each top and bottom hook-bits on the pressure bar and the tube ends then point right.
Pull the tubes tight to secure.
The pre-punched Patient Medical Records/Forms etc are fed onto the tubes.
Then the pointed ends of the U link are pushed into the hollow ends of the tubes to secure.
Fold over the left side of the folder and you’re done.
To add more records you just remove the U link, pop them onto the tube, then replace the U link.

I make up dozens at a time and I have to wear 2 thimblettes and 2 plasters otherwise I get “wounded”.

Complicated system Cathy!



What is this?

Looks as complicated as Cathy's ring binder.

What's wrong with the lever arch file anyway? Gives same access and comes ready built to avoid injury in construction.

Some sort of harness? Horse related?

Looks like another instrument of torture from your farming days.

Kev is very warm and yes Graham, it is related to farming.

A trap, for moles maybe?

Slip it over the sensitive parts and it can act like an emergency break going from top gear to neutral in one move.

Sorry, no Gloria.
In a word, no, Ken!

Ploughing connection?

I have to say yes Kev but I don't know how helpful this will be for you.

I think I have got you all beat with this one. I shall come clean if nobody gets it. You could be forgiven for saying that I am going on about this..... (big clue......!)

Is it for docking a horses tail?

Sorry but no Gloria. Think about my clue above.....

It’s got horse mane or tail hair in it, but can’t think what it could be for. It looks pretty barbaric.

Well I've googled it and it wasn't easy to get the answer! It's the framework of the Burringham Ploughjack's hobby horse costume, so it's much bigger than it looks in that picture, big enough for a man to comfortably wear it. Why did nobody guess that!

The ploughjack hobby horse.

Wendyf wrote: ↑01 Oct 2021, 08:14 Well I've googled it and it wasn't easy to get the answer! It's the framework of the Burringham Ploughjack's hobby horse costume, so it's much bigger than it looks in that picture, big enough for a man to comfortably wear it. Why did nobody guess that!

Well weren’t we all a bit slow on that one, it’s so obvious…..not…….?. I’d have been guessing forever.

The clue was me going on about it = hobby horse!Good, now for the next one.

What is it?

A piece of ornamental stone from an old building?

Stone age weapon?

Kev is so close. More detail please.

Was it fixed on the end of a shaft to make a knobbly club?
Or perhaps it was a non-returning boomerang?

I've got to give it to you Peter. It's the head of an Inca war mace...

Next one?